Reinforced Electronic RFID hidden cabinet lock with Metal Enclosure and wide bolt for high value storage or luxury showcase

Optional Accessories

Reinforced Electronic RFID hidden cabinet lock with Metal Enclosure and wide bolt for high value storage or luxury showcase


In Stock
Unit Price
1 - 9
10 - 49
50 - 149
Quantity price adjusts in the cart. For higher volume, call us for inquiry
  • Application: Easy to install on most wooded panels with thickness from 3/16 to 1-3/16 inch
  • Accessories: Includes (3) cards which can be programmed by user, (1) manual, (1) hardware kit, (1) striking plate and (1) aluminum case reinforced lock
  • Feature: Easy to program - no need for software or PC, the same card can be programmed to operate multiple locks. lock accepts up to 50 user cards.
  • Power: Powered by 3 X AAA batteries (not included). Lower battery alarm.
  • Set-up: Follow the manual. 3 minutes easy set up Management Card (used to create user card) and User Card (the key of the lock)

This is the reinforced version of our popular RFID hidden cabinet drawer and locker lock.

It features behind the panel concealed metal enclosure housing with wider bolt (0.84" comparing to 0.5") and below accessories:
3 card keys (programming card, service card and customer card)
Sensor area sticker 1 pc
Striking plate 1 pc
Screws 7 pcs
3 AAA batteries are not included.
Dimension is 2.27" x 4.65" x 0.75" (118mm x 58mm x 19mm) not including the bolt

This was a great purchase. Setup was extremely easy. Took me about ten minutes to install. I just wish the price was a little cheaper.
Reviewed by:  from 95330. on 2/5/2018
RFID hidden latch
Works as advertised. When initializing your “user” cards be sure to hold them over the reader for a few seconds otherwise they don’t initialize. Also not a bad idea to have an alternate way into your locked space. The manual specifies that an audible warning will be heard when the battery is running low, but you will still have several cycles left before replacement is needed. However it is my understanding that this style latch does not default to the “unlocked” position once the battery dies, so it can’t hurt to have a plan B just in case. My card is easily read thru a piece of 3/8 plywood, however with a piece of decorative aluminum screen over the top the card can not be read. I’m sure this is the same with all rfid readers., so not a big deal. Overall it does the required job for a good price point.
Reviewed by:  from Home. on 12/15/2017
Just installed it. Works as advertised. Pros: Metal Enclosure, easy to follow instructions, invisible locking device. Cons: limited range (works through 3/4" hardwood, but needs to be placed very close to the spot), catch not adjustable (I wanted no play, and was a little off on mounting the catch, so had to shim the box slightly to get it to catch just right.) Would be nice if you could use a micro RFID key (something other than a credit card size).
Reviewed by:  from San Diego. on 5/4/2017
There are no reviews for this product!

Recently Viewed Items

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.